projection keyboard

introduction:

             A projection keyboard is a form of computer input device whereby the image of a virtual keyboard is projected onto a surface: when a user touches the surface covered by an image of a key, the device records the corresponding keystroke.

             virtual keyboard: 

 we can say An optical virtual keyboard,It optically detects and analyses human hand and finger motions and interprets them as operations on a physically non-existent input device like a surface with painted or projected keys. In that way it can emulate unlimited types of manually operated input devices (such as a mouse, keyboard, and other devices). Mechanical input units can be replaced by such virtual devices, potentially optimized for a specific application and for the user's physiology, maintaining speed, simplicity and unambiguity of manual data input.

            design:

A laser or beamer projects visible virtual keyboard onto level surface. A sensor or camera in the projector picks up finger movements ,Software converts the coordinates to identify actions or characters.

Some devices project a second (invisible infrared) beam above the virtual keyboard. The user's finger makes a keystroke on the virtual keyboard. This breaks the infrared beam and reflects light back to the projector. The reflected beam passes through an infrared filter to the camera. The camera photographs the angle of incoming infrared light. The sensor chip determines where infrared beam was broken. Software determines the action or character to be generated.

The projection is realized in four main steps and via three modules: projection module, sensor module and illumination module. The main devices and technologies used to project the image are a diffractive optical element, red laser diode, CMOS sensor chip and an infrared (IR) laser diode.

note:

An infra-red plane of light is generated on the interface surface. The plane is however situated just above and parallel to the surface. The light is invisible to the user and hovers a few millimeters above the surface. When a key position is touched on the surface interface, the light is reflected from the infra-red plane in the vicinity of the key and directed towards the sensor module.

coordinates:

Map reflection coordinates (Sensor Module)

The reflected light user interactions with the interface surface is passed through an infra-red filter and imaged on to a CMOS image sensor in the sensor module. The sensor chip has a custom hardware embedded such as the Virtual Interface Processing Core and it is capable of making a real-time determination of the location from where the light was reflected. The processing core may track not only one, but multiple light reflections at the same time and it can support multiple keystrokes and overlapping cursor control inputs.

Interpretation and communication (Sensor module)

The micro-controller in the sensor module receives the positional information corresponding to the light flashes from the sensor processing core, interprets the events and then communicates them through the appropriate interface to external devices. By events it is understood any key stroke, mouse or touchpad control.

Most projection keyboards use a red diode laser as a light source and may project a full size QWERTY keyboard. The projected keyboard size is usually 295 mm x 95 mm and it is projected at a distance of 60 mm from the virtual keyboard unit. The projection keyboard detects up to 400 characters per minute.

The keyboard unit works on lithium-ion batteries and offers at least 120 minutes of continuous typing. The projection unit sizes vary but normally is not bigger than 35 mm x 92 mm x 25 mm.